1
P/N: 4809650
©2004 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
11NOV04 v1.0 03DodgeHemi(4809650v1.0)
Section 5
COOLANT RESERVOIR RELOCATION
A. Locate the lower radiator hose. Locate the
TEE fitting in the lower radiator hose that
the 1" hose attaches measure up approxi-
mately 2-1/2" from the TEE fitting and cut
the upper portion of the hose.
B. Locate the three spacers, screws, and wash-
ers in the coolant relocation assembly. Raise
the coolant reservoir using the spacers and
secure with the supplied 6mm screws and
washers. (See Fig. 5-a.)
5. COOLANT RESERVOIR RELOCATION
Fig. 5-a
C. Locate the supplied 1" “L” shaped hose,
hose clamps and the polished formed cool-
ant tube in the coolant reservoir assembly.
Install the straight section of the tube into
the modified 1" lower radiator hose and
secure with a supplied hose clamp. (See Fig
5-b.)
Fig. 5-b
D. Attach the “L” shaped hose to the outlet of
the coolant reservoir. Measure and trim to
the appropriate length and secure with the
supplied hose clamps. (See Fig. 5-c.)
Fig. 5-c
TO MODIFIED
LOWER COOLANT
HOSE
5. COOLANT RESERVOIR RELOCATION
