SSL Scanner
Tunneling by Category
The Tunneling by Category section looks like this:
Using this section, you can configure tunneling for particular URL filtering cat-
egories. You can configure up to three categories for tunneling. These may
pre-defined or user-defined categories.
If you w ant to use additional categories, you need to enter them in the <pol-
icy>.ini configuration file, which is located in the conf folder of the Webwasher
program files.
This tunneling option is not enabled by default. If you want to enable it, mark
the checkbox next to the section heading.
After specifying the appropriate information, click on Apply Changes to make
your settings effective.
Use the items in the following areas to configure tunneling by category:
• Define for which categories sessions should be tunneled
Select up to three categories from the drop-down lists provided here. Cat-
egories may be selected from pre-defined or user-defined categories.
To delete a category, click on the Please select / Delete category list
item in the corresponding drop-down list.
• Define tunneling behavior
To determine what tunneling should mean for the selected categories, en-
able one of these options:
— Verify certificate only
The certificate belonging to the requested U RL is checked by a ver-
ification procedure, but no other activities are performed by the SSL
Scanner.
4–10
