A SERVICE OF

logo

Open as PDF
next previous
4 Replacement Procedures 4.6 Slim select bay module
3. Remove the following screws securing the connector and plastic brace.
• M2×8S BIND screw ×2
4. Remove the connector and plastic brace from the slim select bay module.
5. Remove the following screws securing the plastic frame.
• M2×3S S-THIN HEAD screw ×5
M2×3S S-THIN HEAD screw
M2×8S BIND screw
M2×3S S-THIN HEAD screw
Connector
Plastic brace
Plastic frame
Figure 4-9 Disassembling the slim select bay module (for example DVD-ROM drive)
4-18 [CONFIDENTIAL] TECRA M5 Maintenance Manual (960-542)