A SERVICE OF

logo

4 Replacement Procedures 4.10 Display assembly
2. Peel off the black insulator from the HDD slot and disconnect the Speaker cable
from the connector CN6170 on the sound board.
Black insulator
Speaker cable
CN6170
HDD slot
Figure 4-18 Removing the display assembly (2)
3. Turn the computer face up and open the display.
4. Disconnect the LCD cable from the connector CN5000 on the system board.
5. Disconnect the Bluetooth cable from the connector CN4400 on the system board.
6. Disconnect the finger print sensor cable from the connector CN9700 on the system
board.
7. Disconnect the touch pad cable from the connector CN3201 on the system board.
4-30 [CONFIDENTIAL] TECRA M5 Maintenance Manual (960-542)