A SERVICE OF

logo

4 Replacement Procedures 4.29 Speaker
4.29 Speaker
Removing the Speaker
To remove the speaker, follow the steps below and refer to Figure 4-54.
1. Take out the speaker cable and right speaker from the slot. (The speaker cable is
stuck to the base at one point with a double-sided tape)
2. Peel off three insulators and remove the left speaker from the slot.
Speaker (right)
Speaker cable
Guide
Double-sided tape
Speaker (left)
Insulators
Figure 4-54 Removing the speakers
4-78 [CONFIDENTIAL] TECRA M5 Maintenance Manual (960-542)