A SERVICE OF

logo

4.21 LAN/Modem jack 4 Replacement Procedures
4.21 LAN/Modem jack
Removing the LAN/Modem jack
To remove the LAN/Modem jack, follow the steps below and refer to Figure 4-40.
1. Peel the insulators and acetate tapes.
2. Take out the modem cable and remove the LAN/Modem jack from the slot.
LAN/Modem jack
Insulator
A
cetate ta
p
e
Modem cable
Figure 4-40 Removing the LAN/Modem jack
Installing the LAN/Modem jack
To install the LAN/Modem jack, follow the steps below and refer to Figure 4-40.
1. Arrange the Modem cable along the guides.
2. Install the LAN/Modem jack in the slot of the base assembly.
3. Stick the insulators and acetate tapes.
TECRA M5 Maintenance Manual (960-542) [CONFIDENTIAL] 4-57