A SERVICE OF

logo

Chapter 6 Network Deployment
X6004 User’s Guide
88
6.4.1 DYNDNS Wildcard
Enabling the wildcard feature for your host causes *.yourhost.dyndns.org to be aliased to the
same IP address as yourhost.dyndns.org. This feature is useful if you want to be able to use,
for example, www.yourhost.dyndns.org and still reach your hostname.
If you have a private WAN IP address, then you cannot use Dynamic DNS.
6.4.2 DDNS Configuration
Use this screen to configure your Dynamic DNS settings. To access this screen, click
Configuration > Network > DDNS.
Figure 77 Configuration > Network > DDNS
Each field is described in the following table.
Table 14 Configuration > Network > DDNS
LABEL DESCRIPTION
DDNS Type Select the type of service that you are registered for with your Dynamic DNS
service provider.
User Name Type your user name.
Password Type the password assigned to you.
Domain name Type the domain name assigned to your X6004 by your Dynamic DNS provider.
You can specify up to two host names in the field separated by a comma (",").
Enable Wildcard
Option
Select the check box to enable DynDNS Wildcard.
Interface This field displays the interface registered to use DDNS services. On the X6004 it
always displays “WAN”.
Mail Exchanger Use this field if the mail exchange server in your organization has a dynamically
assigned IP address and you have not already registered it with a Dynamic DNS
provider. Enter the domain name of your mail exchange server.
Apply Click this to save your changes.
Reset
Click this to set every field in this screen to its last-saved value.