6
3.3 Table of Warnings
• To reduce the risk associated with
mechanical and electrical hazards:
− Read, understand, and follow all safety and
operating instructions before operating or
servicing the case sealer.
− Allow only properly trained and qualifi ed
personnel to operate and service this
equipment.
WARNING
• To reduce the risk associated with
hazardous voltage:
− Position electrical cord away from foot and
vehicle traffi c.
WARNING
• To reduce the risk associated with
pinches, entanglement and hazardous
voltage:
− Turn electrical supply off and disconnect
before performing any adjustments,
maintenance or servicing the machine or
taping heads.
WARNING
• To reduce the risk associated with
pinches and entanglement hazards:
− Do not leave the machine running while
unattended.
− Push the machine off when not in use.
− Never attempt to work on any part of the
machine, load tape, or remove jammed
boxes from the machine while the machine
is running.
WARNING
3-SAFETY (continued)
2011 June
700a-NA
Figure 3-4
Figure 3-2
Figure 3-3