Filter
Top Products
38
16.2 Spare Parts Order
Order parts by quoting the following information:
(Refer to the Identifi cation Plate on the Machine)
• MACHINE MODEL
• SERIAL NUMBER
• FIGURE NO.
• POSITION
• 3M PART NO. (11 DIGITS)
• DESCRIPTION
• QUANTITY
Important!
The machine is constantly revised and improved by our designers. The spare parts catalogue is also periodically
updated. It is very important that all the orders of spare parts make reference to the serial number of the machine
(located on the identifi cation plate on the machine).
The manufacturer reserves the right to modify the machine at any time without notice.
It is suggested that the following spare parts be ordered and kept on hand.
700a
Qty. 3M-Part Number Description
2 78-8070-1531-4 Belt-Drive W/Hook
See Manual 2
16-TECHNICAL DOCUMENTATION AND INFORMATION (continued)
2011 June
700a-NA
Replacement Parts Ordering Information and Service
Refer to the fi rst page of this instruction manual "Replacement Parts and Service Information".
Tool Kit
A tool kit, part number TBA, is available as a stock item. The kit contains the necessary open end and hex socket
wrenches for use with the metric fasteners on the case sealer. The threading tool, part number
78-8076-4726-4, contained in above kit is also available as a replacement stock item.
Refer to Manual 2 for recommended taping head spare parts.
Labels
In the event that any labels are damaged or destroyed, they must be replaced to ensure operator safety.