Filter
Top Products
E. TO REMOVE GAS TAPS/IGNITION SWITCHES
1. Isolate from electric and gas supply.
2. Proceed as ‘TO REMOVE HOTPLATE.
3. Proceed as ‘TO REMOVE FACIA’.
4. Disconnect gas rail feed pipe (19mm nut). (See Fig. 28).
5. Disconnect all gas connections to taps (5 nuts - 13mm, 14mm & 19mm).
6. Remove (4) screws fixing gas rail.
7. Disconnect ignition switch.
8. Lift complete gas rail assembly clear of appliance.
9. Remove bolt (1) and clamp fixing to gas rail and withdraw from gas rail.
10. Re-assemble in reverse order.
53
Fig. 28
Fig. 28A
DESN 513527
DESN 513711