Filter
Top Products
K. TO REMOVE THERMOCOUPLE (LHF BURNER)
1. Isolate from electric supply.
2. Proceed as ‘TO REMOVE THE HOTPLATE’.
3. Undo the nut fixing the thermcouple in place.
4. Push the thermocouple down and pull out from under the burner.
5. Disconnect the other end of the thermcouple cable from the gas valve. This is a push on
jack connector.
6. Re-assemble in reverse order.
56
Fig. 31 DESN 513530
Fig. 32 DESN 513532