Filter
Top Products
SERVICING - WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
10
25 To Remove the LH Oven Bottom
and Top Elements
Disconnect from the electricity supply.
Bottom Element
Pull the cooker forward to access the cover
boxes at the rear of the unit. Remove the fixings
that secure the cover and lift it clear.
Remove the 2 screws ‘A’ and allow the plate to
drop down.
Remove the 2 screws B, holding the element to
the bottom sheet..
Disconnect the leads, noting their positions.
Withdraw bottom element. Fit the new element
and re-assemble parts in reverse order.
Top Element
Open the LH oven door and undo the fixings
that secure the heat shield. Remove the top
element bracket fixings and withdraw element.
Replace the element and re-assemble parts in
reverse order. Check that the oven operates
satisfactorily.
26. To change oven light bulb.
Disconnect from the electricity supply.
Remove the oven furniture. Unscrew the bulb.
Fit an Edison screw fitting 15w 125-130v lamp,
FOR OVENS. It must be a special bulb, heat
resistant to 300 °C.