Filter
Top Products
7
SERVICING - WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
13. To Remove Broiler Outer Door
Panel
Open left hand oven door and remove 2 screws
from bottom edge of broiler door. Open broiler
door, support broiler door outer panel and
remove two screws from top inner face of broiler
door. There is a pad of fibre insulation inside the
door.
Reassemble in reverse order making sure that
the pad of insulation is in place.
14. To Remove an Oven Door
Open oven door and remove Handyrack (where
fitted) by springing one side out of the bracket
on the door and sliding the other side free.
Support the door and remove the two screws
securing the upper hinge and packing to the
cooker front. Remove the door from the lower
hinge by lifting slightly and moving outwards.
Reassemble in reverse order.
15. To Change Oven Door Outer
Panel
Remove the two plastic blanking plugs from the
door handles. Remove the 4mm Hex headed
screws holding the handle to the door with the
hexagon key tool. Remove two screws from top
edge and two from bottom edge of the door.
Remove outer door panel. Fit door handle to
new panel. Fit the plastic blanking plugs to the
fixing holes.
The handles should be above the fixings.
Fit panel to door. If replacing the outer panel on
the right hand door (with the Thermodial) take
care to make sure the sensor of the Thermodial
is sealed to the door by the rubber grommet.
Reassemble in reverse order.