Filter
Top Products
9
SERVICING - WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
panel away. Re-assemble in reverse order.
Ensure that the retaining fixings are fully
tightened.
21. To Replace the Cooling fan
Disconnect from electricity supply.
Pull cooker forward to gain access to the rear of
the cooker.
Support the fan and remove the screws holding
the cooling fan mounting bracket. Gently lift the
fan and bracket away from the range taking
care not to strain the electrical connection.
Disconnect the leads from the fan noting the
orientation. Remove the fan from the mounting
bracket. Fit the new fan and reassemble in
reverse order.
22. To Replace an Oven Fan
Disconnect from electricity supply.
Pull the unit forward to access the cover boxes
at the rear of the appliance. Remove the fixings
that secure the cover and lift it clear. Remove
the fan wiring, noting the connection positions.
Remove the inner back as detailed in Section
20. Hold the fan blades and undo the centre nut
(LH thread), brass washers, fan blade and
Circlip. Undo the fixings that retain the fan and
remove it from the cavity rear. Fit the
replacement and re-assemble parts in reverse
order. Check that the oven operates
satisfactorily.
23. To Remove an Oven fan Element
Disconnect from electricity supply.
Remove the inner back as detailed in Section
20.
Remove the fixings that secure the element
within the oven and lift the element away
carefully. Disconnect the leads and connect to
the replacement element and re-assemble parts
in reverse order. Check that the oven operates
correctly.
24. To Remove Broiler Element.
Disconnect from electricity supply.
Remove broiler pan from broiler chamber. From
inside broiler compartment remove enamelled
front shield from broiler roof, 2 screws and
washers. Remove 2 screws and washers
securing the broiler element front support.
Remove 1 screw from each of the broiler
elements and withdraw broiler elements from
broiler chamber. Disconnect the leads and
connect to the replacement elements and re-
assemble parts in reverse order. Check
operation of broiler.