Alto-Shaam ASF-75E Fryer User Manual


  Open as PDF
of 70
 
Electric Fryer Operation & Care Manual • 26
DELUXE CONTROL OPERATION
MANUAL OPERATION
1. Press and hold the ON/OFF key for 1 second to energize the fryer.
The following will appear in the Alpha/Numeric Display:
“MELTCYC”
The fryer will start the melt-cycle mode. This is the required mode for melting solid
shortening within the frypot. The fryer will generate ON/OFF heating cycles and will
remaininthismodeuntil180°F(82°C)isreachedorthemodeismanuallybypassed.
FOR USE WITH LIQUID SHORTENING, PRESS THE TEMPERATURE KEY FOR
4 SECONDS TO BYPASS THE MELT CYCLE.
“PREHEAT”
The fryer will generate a continuous heating cycle until it reaches the operator pre-
programmedset-pointoradefaulttemperatureof350°F(177°C).
“READY”
Whenthefrypottemperatureisreached,“READY”, will appear in the Alpha/Numeric
Display.
2. LOAD PRODUCT Loadproductinbasket(s)andsetbasket(s)inthefryerliftbrackets.Thebasket(s)will
automatically lower into the oil after the correct amount of
time has been entered and the manual time key is pressed.
3. Press the “MANUAL TIME KEY” when “READY” appears in the Alpha/Numeric Display.
Thepreviouslysettime(in minutes)or“0:00”willbegintoashinthedisplay.
4. PRESS THE UP AND DOWN ARROW KEYS TO ADJUST THE AMOUNT OF TIME.
continued
75°F
Melt-Cyc
0:00
Manual
3:50°F
Ready
275°F
Preheat
 previous next