Alto-Shaam ASF-75E Fryer User Manual


  Open as PDF
of 70
 
Electric Fryer Operation & Care Manual • 36
DELUXE CONTROL OPERATION
PROGRAMMING THE CONTROL
“BsktLift”
The Basket Lift program provides the operator with the ability to enable or disable the
automatic basket lift function. In the “ON” position, the baskets will lift automatically as
programmed in the selected product procedure. In the “OFF” position, both baskets will
remain in the raised position until manually dropped by the operator. This function is set
in the “ON” position as received from the factory. IT IS STRONGLY RECOMMENDED
THAT THE “BSKTLIFT” REMAIN AT THIS SETTING. If it is ever necessary to
transition from the disabled “OFF” position to the enabled “ON” position, the control
display will indicate “POWERDOWN” requiring the operator to perform a control
shutdown in order to synchronize the baskets with the revised state of the control.
TurntheMasterPowerSwitch(locatedbehindthefrontaccessdoor)tothe“OFF” position.
Press the Up or Down arrow keys to scroll until “BsktLift” appears in the display. Press the
Right4arrow key to enter the program. Display stops flashing. The previous setting
will appear in the display. Press the Up or Down arrow keys to change the setting.
Whenthecorrectsettingappears,presstheRight4 arrow key to confirm. Display flashes.
Press the Down arrow key to advance the control to the next
setting option.
“LiftSync”
available on dual-control fryers only. The “LiftSync” program provides the ability
to raise both basket lifts simultaneously by selecting the “ON” position. The factory
preset is in the “OFF” position for independent operation.
Press the Up or Down arrow keys to scroll until “LiftSync” appears in the display. Press the
Right4 arrow key to enter the program. Display stops flashing. Press the Up and
Down arrow keys to toggle between “ON” and “OFF.”Whentheselectionhasbeen
made, press the Right4 arrow key to to confirm the selection. Display flashes. Press the
Down arrow key to advance the control to the next programming function.
“Temp F/C”
The temperature display can be shown in degrees Fahrenheit or Celsius.
Press the Up or Down arrow keys to scroll until “Temp F/C” appears in the display. Press the
Right4arrow key to enter the program. Display stops flashing. The current setting will
appear in the display. Press the Up or Down arrow keys to toggle between “F” and
“C.” Press the Right4 arrow key to accept the desired selection. Display flashes. Press
the Down arrow key to advance the control to the next programming function.
F
Temp F/C
ON
LiftSync
ON
BsktLift
To exit the control programming mode at any time, press and hold the LEFT arrow key.
 previous next