Alto-Shaam ASF-75E Fryer User Manual


  Open as PDF
of 70
 
Electric Fryer Operation & Care Manual • 37
DELUXE CONTROL OPERATION
PROGRAMMING THE CONTROL
“Language”
The language option is only available in English “ENG” at this time.
“TempDisp”
The operator can choose to have the fryer oil temperature continuously shown in the
display during a product cooking sequence by selecting “ON” or to a normal display
sequence by selecting “OFF.” The function is set to “ON” at the factory.
Press the Up or Down arrow keys to scroll until “TempDisp” appears in the display. Press
the Right4arrow key to enter the program. Display stops flashing. The current setting
of “ON” or “OFF” will appear in the display. Press the Up or Down arrow keys
tochangethesetting.Whenthecorrectsettingappears,presstheRight4 arrow key to
confirm the setting. Display flashes. Press the Down arrow key to advance the control
to the next programming function.
“AlarmSet”
The operator is able to set the volume of the fryer alarm to off, low, medium or high
“OFF”, “LO”, “MED” or “HI.” The alarm is set to “HI” when received from the factory.
Press the Up
or Down arrow keys to scroll until “AlarmSet” appears in the display. Press
the Right4arrow key to enter the program. Display stops flashing. The current setting
will appear in the display. Press the Up or Down arrow keys to toggle among
theavailablechoices.Whenthecorrectsettingappears,presstheRight4 arrow key to
confirm the setting. Display flashes. Press the Down arrow key to advance the control
to the next programming function.
“IdleMode”
The idle mode allows the operator to set a period of time during which the fryer is not
beingusedbutstillmaintainsfullfryeroiltemperature.Whenidletimeexpires,the
fryeroiltemperaturewilldropto250°F(121°C)atwhichpointtheoil/shorteningmust
be reheated before frying additional product. This time period can be adjusted between
“OFF” and 60:00 minutes. Thefactorydefaultissetat30minutesidletime.
Press the Up or Down arrow keys to scroll until “IdleMode” appears in the display. Press the
Right4arrow key to enter the program. Display stops flashing. If no idle time is required,
press the Down
arrow key until “OFF”appears in the display. Press the Up or
Downarrowkeystochangethesetting.Whenthecorrectsettingappears,pressthe
Right4 arrow key to confirm. Display flashes. Press the Down arrow key to advance
the control to the next programming function.
“IdleMode” can be interrupted at any time by pressing any of the 12
product preset keys. The fryer will immediately begin to preheat to the
set-point temperature. The baskets can be dropped only after the set-point
temperature has been reached.
ENG
Language
ON
TempDisp
HI
Alarm Set
30:00
IdleMode
To exit the control programming mode at any time, press and hold the LEFT arrow key.
 previous next