Alto-Shaam ASF-75E Fryer User Manual


  Open as PDF
of 70
 
Electric Fryer Operation & Care Manual • 29
DELUXE CONTROL OPERATION
PROGRAMMING THE CONTROL
Starting with the control in the OFF position, press and hold the “PROGRAM” key for a period of 5 to 10
seconds.
“Boil”willalwaysappearastherstiteminthedisplaywheneverthe“PROGRAM” key is initially pressed. Detailed
boil-out instructions are located in the OPERATION section of this manual.
Press the DOWN arrow key to bypass the “Boil” program.
“Boil”
Press the right4 arrow key enter the “Boil” program (see OPERATION section).
The display will indicate “READY ?”. Press the right4 arrow key to start the boil-out function.
Theboil-outsolutionwillbegintoheattoatemperatureof195°F(91°C).Whenthetemperaturehas
been reached, the display will begin a 10 minute countdown.
At the end of the boil-out period, an alarm will sound and the control will revert
to the OFF state.
Boil
NOTE: Before entering this program, make certain the frypot is empty of all oil or shortening.
Closethefrypotdrain.Carefullyfollowthemanufacturer’smixingdirectionsandll
the frypot with a mixture of cold water and fryer boil-out solution.
Ready ?
To exit the control programming mode at any time, press and hold the LEFT arrow key.
CAUTION
DO NOT LEAVE THE FRYER UNATTENDED DURING
THE BOIL-OUT PROCESS. THE FRYER MUST BE
CONTINUOUSLY MONITORED FOR BOIL-OVER
CONDITIONS, PARTICULARLY IN HIGH-ALTITUDE
LOCATIONS. IF BOIL-OVER IS IMMINENT, IMMEDIATELY
TURN THE MASTER POWER SWITCH OFF AND ALLOW
THE SOLUTION TO COOL. WHEN THE SOLUTION HAS
COOLED, RE-ENTER THE BOIL-OUT MODE.
 previous next