Alto-Shaam QC-100 REMOTE Refrigerator User Manual


 
QUICKCHILLER INSTALLATION/OPERATION/SERVICE MANUAL 18.
O P E R A T I O N
Starting from the OFF position,
press the power key
O
N
.
The Alto-Shaam name will illuminate and the
SELECTION SCREEN will appear on the
display. The compressor will become
energized and will begin to operate if required
by the sensors.
Press the SOFT CHILL key.
The display will indicate the last operator set
internal compartment temperature.
To change the displayed temperature, press the up
or down arrow key to increase or decrease the
temperature displayed within the parameters of the
Soft Chill mode.
Press the START/STOP key.
The Display will require the operator to select
between chilling by PROBE or by TIME.
S
elect the desired Soft Chill method by
pressing the right or left arrow keys. After
the selection has been made, press the
START/STOP key.
NOTE: MODIFIED COMPARTMENT TEMPERATURE IS NOT
STORED OR SAVED UNTIL THE START BUTTON IS
PRESSED TO BEGIN QUICKCHILLER OPERATION
.
1.
3.
4.
SOFT CHILL
2.