Filter
Top Products
10
Gas and Electrical Entry Points
Gas and electric entry points are located in right rear
corner of cooktop bottom. Dimensions are to center of
connection.
A
B
A—4¾ inches
B—¾ inch
Gas Location
A
B
A—1 inch
B—½ inch
Electrical Location
Gas and Electrical Installation
Requirements
If an external electrical source is used when appliance
is installed, it must be electrically grounded in
accordance with local codes or, in absence of local
codes, with current National Electrical Code ANSI NFPA
70, or CSA Standard C22.1, Canadian Electrical Code,
Part 1.
When installed in mobile housing, installation is to be in
accordance with CSA standard Z241.1 gas equipped
mobile housing. All electrical connections are to be
made in accordance with CSA standards Z240.6.1
electrical requirements for mobile homes.
6 inch ducting pieces
6-inch to 3¼ x 10-inch
transition = 5 equivalent
feet
6-inch to 3¼ x 10-inch
transition = 1 equivalent
foot
6-inch 90° elbow =
5 equivalent feet
6-inch 45° elbow =
2½ equivalent feet
6-inch wall cap
(Unrestricted) = 0
equivalent feet
(Amana wall cap
model CC30)