Filter
Top Products
www.amctechcorp.com 87
inetd.conf. Upon receiving a connection request, it will start up the server. Therefore the server has no need
to set up sockets.
The inetClient is very similar to the simple client, since it must still read and write to a socket. The socket is set
up using information gathered by the function getservbyname() which will check for the service inetServer on
the host NETdimm. After confirmation of the service is established, the program will create a socket, connect
and transfer the file as before. Unlike the simple client, there is no need to designate the connection port since
getservbyname() will retrieve this information.