Filter
Top Products
Aquatic Industries, Inc.
10
INSTALLATION INSTRUCTIONS
Rectangular
Models
↔
Corner
Models
↔
Oval
Models
↔
DECK CUTOUT: A paper template will be enclosed with all
oval models. For the deck cutout, scribe on the deck two
center lines (a major and minor axis). Next, match the center
lines and trace the ellipse. Repeat this step three more
times. Once the tracing is complete, cut out the ellipse. The
dimensions should be exactly 2” smaller than the unit.
A - 6” x 12” (150 x 305)
Box-outs
B - Leveled Supports
1” x 3” (25 x 75) Ledgers
C - 12” x 18” (305 x 460)
Minimum Access
ALCOVES
ISLANDS
A
Measurements should be taken directly from the tub.