Filter
Top Products
- 18 -
INTERIOR REACH-IN ACCESSORIES
The standard interior accessory package that is supplied from the factory with your
new value line and designer line reach-in consists of standard pilaster strips with
pilaster clips (four (4)clips per shelf), three (3) epoxy coated shelves per section,
and four (4) epoxy coated shelves per section on glass door models only.
SHELVING INSTALLATION
Pilaster strips which support the shelving are secured to the cabinet walls with
special pilaster screws which allow the strips to be readily removed for cleaning
without the use of tools. Shelf clips are easily installed by inserting them into the
pilasters at the desired shelf location and shelf installation is as simple as placing
the shelf on the clips as shown in figure 11. The standard pilaster and clip are
shown in figure 11a, and the optional heavy-duty pilaster and clip are shown in
figure 11b.
Important Note: When loading shelves with food product, allow space between
rows of product for proper air circulation, and do not load product to block back wall
(leave at least 2" of air space between product and back wall).
FIGURE 11a
STANDARD PILASTER