Filter
Top Products
Remove all packaging before positioning the
machine.
See the following diagram. Ensure there is a
clearance each side of the machine to allow slight
side ways movement for servicing.
Work top of your dishwasher is removable if
required. Height without the work top is 820 mm.
By removing the machines worktop, you can
install it under a close fitting sink unit or a pre-
existing top, if the dimensions of the recess
correspond to those shown in the picture.
Position the machine next to a water tap and a
drain.
When inserting the machine, ensure that the
water inlet and drain hoses are not kinked or
squashed.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Good levelling is essential for correct closure and
sealing of the door,
Make sure your dishwasher is perfectly level using
the adjustable feet.
When the appliance is correctly levelled, the door
will not catch on the inner liner on either side of
the cabinet.
If the door does not close correctly, loosen or
tighten the adjustable feet, until the machine is
perfectly level.
15mm
9
min 850mm