Beko UL483APW Refrigerator User Manual


 
EN
4
2 Warnings
•DO NOT connect your appliance to the
electricity supply until all packing and
transit protectors have been removed.
• Leave to stand for at least 4 hours before
switching on to allow compressor oil to
settle if transported horizontally.
• If you are discarding an old refrigerator
with a lock or latch fitted to the door,
disable the lock/latch, ensure that it is
left in a safe condition to prevent the
entrapment of young children.
• This fridge/freezer must only be used for
its intended purpose i.e the storing and
freezing of edible foodstuff.
• Do not dispose of the appliance on a fire.
At BEKO, the care and protection of our
environment is an ongoing commitment.
This appliance which is among the latest
range introduced is particularly environment
friendly. Your appliance contains non CFC
/ HFC natural substances in the cooling
system (Called R600a) and in the insulation
(Called cyclopentane) which are potentially
flammable if exposed to fire. Therefore,
take care not to damage, the cooling circuit
/ pipes of the appliance in transportation
and in use. In case of damage do not
expose the appliance to fire or potential
ignition source and immediately ventilate
the room where the appliance is situated.
• We suggest you contact your local
authority for disposal information and
facilities available.
• See Installation Instructions on on page 8
for information on suitable location.
• To obtain the best possible performance
and trouble free operation from your
appliance it is very important to carefully
read these instructions.
• On delivery, check to make sure that
the product is not damaged and that all
the parts and accessories are in perfect
condition.
• Ensure that the plug remains readily
accessible. Do not use multiple adapter bar
or extension cable.
• Failure to observe these instructions may
invalidate your right to free service during
the guarantee period.
• Keep ventilation openings, in the
appliance enclosure or in the built-in
structure, clear of obstruction.
• Do not use mechanical devices or
other means to accelerate the defrosting
process, other than those recommended
by the manufacturer.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances inside
the food storage compartments of the
appliance, unless they are of the type
recommended by the manufacturer.
• We suggest you keep these instructions
in a safe place for easy reference.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
• Children should be supervised to ensure
that they do not play
with the appliance.
Electrical Requirements
Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown on the rating plate
inside the appliance corresponds to
yourelectricity supply.
Rating label is on the left hand side of
fridge inner liner.
We recommend that this appliance be
connected to the mains supply via a
suitable switched and fused socket. The
appliance must be positioned so that the
plug is accessible.