Filter
Top Products
EN
8
Replacing the interior light
bulb
Should the light fail to work switch off at
the socket outlet and pull out the mains
plug. Follow the below instructions to
check if the light bulb has worked itself
loose.
If the light still fails to work obtain a
replacement E14 screw cap type 15 Watt
(Max) bulb from your local electrical store
and then fit it as follows:
1. Switch off at the socket outlet and pull
out the mains plug. You may find it useful
to remove shelves for easy access.
2. Remove the light diffuser cover as
shown in figure (a-b).
3. Replace the burnt-out light bulb.
4. Reassemble the light diffuser cover as
shown in figure (c).
“Push firmly to ensure cover is fitted
properly.”
5. Carefully dispose of the burnt-out light
bulb immediately.
“Replacement light bulb can easily be
obtained from a good local electrical or DIY
store.”