Filter
Top Products
Maintenance
10
Cleaning and Preventative Maintenance
CLEANING THE O VEN
Painted and stainless s teel ovens may be kept
clean and in good condition with a light oil.
1. Saturate a cloth, and wipe the oven w hen it is
cold.
2. Dry the oven with a clean cloth.
On the stainless front or interiors, deposits of
baked on splatter may be removed with any non-
toxic industrial stainless steel cleaner. Heat tint
and heavy discoloration may be removed with any
non-toxic commercial oven cleaner.
1. Apply cleaners w hen the oven is cold, and al -
waysrubwiththegrainofthemetal.
Clean Cordierite decks with a triangula r scraper
used for cleaning broiler grids. IMPORTANT --
DONOTusewateroranyotherliquidstoclean
the deck! Due to the porosity of the Cordierite,
cracking and/or spalling will often result if water is
used.
Clean the al uminized interior portion o f the ove n
with a mild detergent. DO NOT use caustic solu-
tionssuchasammonia,lyeorsodaash.DONOT
use domestic oven cleaners. Any of these prod-
ucts will damage the aluminum coating.
Daily Cleaning
D Remove residue from beneath the doors with a
small broom or brush.
Weekl y Cleaning
D Brush out the control area.
6 Month Cleaning
D Clean secondary air ducts and air entry ports.
PREVENTATIVE MAINTENANCE
The best preventative maintenance measures are,
the proper installation of the equipment and a pro-
gram for routinely cleaning the ovens.
This oven requires no lubrication, however, the
venting system should be checked annually for
possible deterioration resulting from moisture and
corrosive flue products.
If maintenance or repairs are required, contact the
factory, the factory representative or a local
Blodgett service company.
WARNING!!
Disconnect the oven from the power sup-
ply before servicing or cleaning.