Filter
Top Products
Operation
15
Solid State Digital Control with Humidaire
1
2
3
4
5
6
9
11
8
7
10
12
13
14
15
Figure 11
CONTROL DESCRIPTION
1. SELECTOR SWITCH --- controls power to the
oven for high fan, low fan or cool down.
2. DISPLAY --- displays time or temperature and
other information related to oven function.
3. HEAT LAMP --- lights when heater is on.
4. PULSE LAMP --- lights when Pulsed F an Mode
is turned on.
5. HOLD LAMP --- lig hts when Hold Mode is
turned on.
6. DIAL --- used to enter set points in display
7. START/STOP KEY --- starts or stops the timer.
8. TIME KEY --- used to show time in the display.
9. TEMP KEY --- used to show set temperature in
the display.
NOTE: Actual temperature is shown while the
TEMP key is held down.
10. HOLD KEY --- turns Hold Mode on or off.
11. PULSE KEY --- turns Pulse Mode on or of f.
12. LIGHTS SWITCH --- controls interior lights.
13. HUMIDAIRE START SWITCH --- activates
moisture injection for a preset period of 30
seconds.
14. HUMIDAIRE LAMP --- lights when water is be-
ing injected
15. CIRCUIT BREAKER SWITCH --- controls pow-
er to the oven.