English 20
Settings
The oven setup menu is used to customize certain oven
settings.
The oven must be in Stand by mode (no cooking mode or
timer running) in order to access the setup menu.
To make changes to Settings Menu Items:
1. Press the Settings touchpad.
2. The first setup item is displayed. The display shows
“SET CLOCK”. Press Settings again to access the
settings menu.
3. To display a different setup item, press the number
corresponding to that setting (see table following or
press the Settings touchpad to cycle through available
options).
4. To change the value for the displayed setting press the
Enter touchpad to enter the edit mode. Use the
numeric keypad to change the setting value. The
corresponding setting value is shown in the table
following.
For the temperature offset, with the item in edit mode,
press “-” or “+” first, then the numeric offset value.
The new value is automatically accepted as the display
reverts from edit mode back to display mode.
To exit the Settings menu:
Press the Clear On/Off touchpad.
Settings Menu Options
Menu Item Description Default
1 Temperature
Mode
Fahrenheit (° F) or
Celsius (° C)
°F
2 Brightness High, Medium, Low High
3 Volume High, Medium, Low MED
4 Clock mode 12-hour or 24-hour display
mode. 12HR, 24HR.
12HR
5 Auto
Convection
Conversion
Decreases oven temperature
by degrees set for convection
cooking modes. On, Off.
OFF
6 Button Beep Tone when touchpad is
pressed. On, Off.
OFF
7Stand by
Clock
Display
Clock displays when no
cooking mode or timer is in
use. ON, OFF.
ON
8 Language Language setting: English,
(EN), French, (FR)
EN
9 Temperature
Offset
Note:
Temperature
offsets must
always be
entered as 2
digits.
Example:
5° F is
entered as
05.
Sets the temperature offset
value for Bake, Convection
Bake, Roast, Convection
Roast and Convection Multi-
Rack. When an offset value is
entered, the actual oven
temperature is increased or
decreased by this value. This
feature is useful if food is
consistently either too brown
or too light.
The range for changing the
offset is between +/- 35° F (+/
- 19° C) in 1° increments.
The default value is 0.
0