Bosch Appliances MUM 7400 UC Blender User Manual


 
14
3. Place and engage the twin beating
whisk assembly on the driveshaft of the
mixing bowl as shown in figure 8a.
Figure 8.
4. Place the anti-splash cover on the bowl
so that the tabs on the bowl fit into the
recesses in the cover, and turn the anti-
splash cover counterclockwise to
fasten the bowl cover to the bowl.
The anti-splash cover has an integral filling
funnel with a cap. The cap may be removed
to add ingredients, as shown in figure 8b,
but the cover and cap should be in place
whenever the power unit is in operation. The
anti-splash cover and cap serve to prevent
the escape of flour dust at the beginning of
the stirring process, as well as prevent
splatter, and also serves to prevent
accidental contact with the moving whisks.
Placing into Operation w/Twin Beating
Whisks
Make sure that the switch is in the Off
position, “O/Off.” Unwind the electrical cord
to the necessary length and plug into the
wall outlet. The bowl with whisk assembly
is now ready for operation. See table 1 for
examples demonstrating the use of the twin
beating whisks.
Mixing bowl tips:
1. When using the mixing bowl to knead
or mix a recipe designed to be
prepared by hand, you will find that with
the Bosch Kitchen Machine you can
usually place all the ingredients in the
mixing bowl at once. When doing this,
always place the liquids in first. This
will assure more thorough mixing.
2. When adding ingredients to a mixture:
a. Turn the rotary switch to a lower
speed
b. Remove the cap from the filling
funnel
c. Add the ingredients through the
funnel opening and replace the cap
3. If a large batch of dough is to be left in
the mixing bowl and allowed to rise, the
cover should be removed and placed
only loosely on the bowl so that it is
free to move if the dough should begin
to press on it.
Removing Contents
Before beginning to remove the contents
from the mixing bowl, make sure that the
power unit has been turned to the Off
position, “O/Off.” Remove the anti-splash
cover by turning the cover clockwise and
lifting off. Once the cover has been
removed, the dough hook or the twin beating
whisks may be removed by turning the hook
or whisk assembly clockwise while lifting.
The mixing bowl can be removed from the
power unit by turning the bowl clockwise
while lifting.
The contents may now be used as desired.