Bosch Appliances UC MCM 5100 Blender User Manual


 
20
Removing Contents
Before beginning to remove the contents
from the bowl, make sure that the power
unit has been turned to the Off position,
“O/Off.” Remove the juicer and bowl from
the power unit by turning the juicer and bowl
counterclockwise while lifting. The
contents of the bowl may now be poured
into a suitable container.
Care and Cleaning of Mixing Bowl with
Citrus Juicer
The bowl and citrus juicer are dishwasher
safe. Do not use scouring cleaners on the
bowl or citrus juicer.
The power unit of the food processor should
be cleaned with a clean, damp cloth only.
Never use coarse or caustic cleaning
products to clean this appliance. Never
immerse the power unit in water.
Juice Extractor
The MCM 5200 UC, Bosch Food
Processor, includes the juice extractor
accessory. The juice extractor accessory
consists of the components shown in figure
14.
How to Use Juice Extractor
The juice extractor is intended to be used
with the mixing bowl to extract the juice
from:
hard fruits such as apples, pears,
berries
pitted fruits
vegetables such as carrots and
tomatoes.
Use of mixing bowl with juice extractor
Before beginning to attach this or any other
attachment, make sure that the power unit
is on a smooth, clean, suitable work
surface and switched to the Off position,
“O/Off,” and that you have the safety motor
drive cover in place of the high speed,
blender drive.
1. Before using the mixing bowl and juice
extractor for the first time, they should
be washed. See Before Using for the
First Time, on page 4.
Figure 14.
14a. pusher
14b. cover
14c. grater
14d. strainer
2. Make sure the safety motor drive cover
has been snapped into place on the
high-speed blender drive. Place the
mixing bowl on the dual drive of the
power unit, as shown in figure 4a, and
turn the bowl clockwise with a slight
downward pressure until bowl is firmly
seated.
3. If the grater has not already been
reassembled in the strainer after
washing, place grater in the strainer of
the juice extractor, making sure the two
hooks on the strainer enter the two
slots on the grater, and turn grater
counterclockwise to lock grater and
strainer together. Place grater/strainer
assembly on the dual drive of the power
unit by placing it over the center
column, as shown in figure 15a. Then