Breville BES870CBXL Espresso Maker User Manual


 
11
OPERATING
BEFORE FIRST USE
Machine Preparation
Remove and discard all labeling and
packaging materials attached to your
espresso machine. Ensure you have removed
all parts and accessories before discarding
the packaging.
Remove the water tank located at the back
of the machine by lifting the water tank
handle. Remove the plastic bag containing
the water filter and water filter holder. Clean
parts and accessories (water tank, portafilter,
filter baskets, milk jug) using warm water
and a gentle dish washing liquid, then rinse
and dry thoroughly. Wipe the outer housing,
bean hopper and drip tray with a soft damp
cloth and dry thoroughly. Do not immerse
the outer housing, power cord or power plug
in water or any other liquid.
NOTE
All parts should be cleaned by hand
using warm water and a gentle dish
washing liquid. Do not use abrasive
cleansers, pads or cloths which can
scratch the surface. Do not clean
any of the parts or accessories in
the dishwasher.
CONDITIONING THE WATER FILTER
• Remove the water filter and water filter
holder from the plastic bag.
• Soak the water filter in a cup of water
for 5 minutes, then rinse under cold
running water.
• Wash the water filter holder with cold
water, taking specific care to rinse the
stainless steel mesh.
• Insert the water filter into the two parts
of the water filter holder.
• Set Date Dial 2 months ahead.
• To install the assembled water filter
holder into the water tank, align the base
of the water filter holder with the adapter
inside the water tank. Push down to lock
into place.
• Slide the water tank back into position
at the back of the machine, ensuring to
push down completely to lock into place.
NOTE
To purchase water filters contact
Breville Consumer Support.
OPERATING
your Breville product
Rinse water filter & meshSoak water filter for 5 mins
1 2
Place filter into filter holder
3
Insert & lock water tankInstall filter in water tank
5
Set date 2 months ahead
4 6
REPLACEMENT DUE