Filter
Top Products
27
CARE & CLEANING
for your Breville Dual Boiler™
CARE & CLEANING
CLEANING CYCLE FOR
• CLEAN ME! will be displayed on
LCD to indicate when a cleaning cycle
is required (approx. 200 shots).
• Insert the supplied cleaning disc,
followed by 1 cleaning tablet into the
1 CUP filter basket.
• Insert the portafilter and lock into
group head.
• Ensure the water tank is filled with cold
tap water.
• Place the jug or a 500ml container
beneath the group head.
• Press MENU button until
CLEAN CYCLE icon flashes and
PUSH is displayed on the LCD screen.
• To start the Clean Cycle press the
illuminated MANUAL button.
• The CLEAN CYCLE icon will flash and
the machine will start to countdown
from 320 seconds.
• When the cleaning cycle has finished,
remove the filter holder and ensure
the tablet has completely dissolved.
If the tablet has not dissolved, repeat
the steps above, without inserting a
new tablet.
• Rinse the filter basket and portafilter
thoroughly before use.
INSTALLING WATER FILTERS
• Soak filter in a glass of water for
5 minutes.
• Rinse the filter and mesh under
running water.
• Assemble filter into filter holder.
• Set replacement date forward 2 months.
• Install filter holder into water tank.
• Insert water tank into the machine.
Ensure the latch is locked into position.
NOTE
To purchase replacement filters contact
Breville Customer Service Centre
- AUS 1300 139 798
- NZ 0800 273 845
CAUTION
Do not descale this machine.
Change filters regularly.
Contact Breville customer service
centre for advice.
CLEANING THE STEAM WAND
• Wipe the steam wand with a damp cloth
& purge directly after texturing the milk.
• If the any of the holes in the tip of the
steam wand become blocked, ensure
the STEAM LEVER is in the CLOSED
position and clean using the pin on the
end of the cleaning tool.
• If steam wand remains blocked, remove
the tip using the integrated spanner in
the cleaning tool and soak in hot water.
Screw tip back onto the steam wand
using the integrated spanner in the
cleaning tool.