Filter
Top Products
5
Breville recommends safety first
4
We at Breville are very safety conscious. We design and manufacture consumer products with the
safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of
care when using any electrical appliance and adhere to the following precautions:
IMPORTANT SAFEGUARDS FOR YOUR BREVILLE WIZZ™ MULTI PROCESSOR
Carefully read all instructions before operating
and save for future reference.
Remove and safely discard any packaging
material and promotional labels before using
the Breville Wizz™ Multi Processor for the
first time.
To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug of
this appliance.
Do not place the Breville Wizz™ Multi
Processor near the edge of a bench or table
during operation. Ensure the surface is level,
clean and free of water, flour and other
substances. Vibration during operation may
cause the appliance to move.
Do not place the Breville Wizz™ Multi
Processor on or near a hot gas or electric
burner, or where it could touch a heated oven.
Handle the Breville Wizz™ Multi Processor
and attachments with care – remember the
blades and discs are razor-sharp and should
be kept out of reach of children. Use the blade
protector when storing the processing blade.
Always ensure the Breville Wizz™ Multi
Processor is completely assembled before
operating. The appliance will not operate
unless properly assembled.
Ensure the Speed Selection Dial is in the
Off ‘O’ position and the food processor is
switched off at the power outlet and the
power cord is unplugged before attaching the
processing blade, discs or processing lid.
•
•
•
•
•
•
•
•
Always secure the processing bowl onto the
motor base before attaching the processing
blade or discs.
Always operate the food processor with the
processing lid in position.
Do not push food into the food chute with your
fingers or other utensils. Always use the food
pusher provided.
Keep fingers, hands, knives and other utensils
away from moving blades and discs.
Do not place hands or fingers in the
processing bowl of the food processor unless
the motor, processing blade and discs have
come to a complete stop. Ensure the Speed
Selection Dial in the Off ‘O’ position and the
appliance is switched off at the power outlet
and the power cord is unplugged before
removing the lid from the food processing
bowl.
Ensure the motor and blade or discs have
completely stopped before disassembling.
Ensure the Speed Selection Dial is in the Off
‘O’ position and the appliance is switched
off at the power outlet and the power cord
is unplugged from the power outlet before
attempting to move the appliance, when
not in use, if left unattended, and before
disassembling, cleaning or storing.
Do not use attachments other than those
provided with the Breville Wizz™ Multi
Processor.
Do not attempt to operate the Breville Wizz™
Multi Processor by any method other than
those described in this booklet.
•
•
•
•
•
•
•
•
IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES
Unwind the power cord fully before use.
Do not let the power cord hang over the edge
of a bench or table, touch hot surfaces or
become knotted.
The appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance by
a person responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
It is recommended to regularly inspect
the appliance. Do not use the appliance if
power supply cord, power plug or appliance
becomes damaged in any way. Return the
entire appliance to the nearest authorised
•
•
•
•
•
Breville service centre for examination and/or
repair.
Any maintenance, other than cleaning, should
be performed at an authorised Breville Service
Centre.
This appliance is for household use only. Do
not use this appliance for anything other than
its intended use. Do not use moving vehicles
or boats. Do not use outdoors. Misuse may
cause injury.
The installation of a residual current device
(safety switch) is recommended to provide
additional safety protection when using
electrical appliances. It is advisable that a
safety switch with a rated residual operating
current not exceeding 30mA be installed in
the electrical circuit supplying the appliance.
See your electrician for professional advice.
•
•
•
Breville recommends safety first (continued)
CAUTION: THE PROCESSING BLADE AND DISCS ARE EXTREMELY SHARP, HANDLE WITH
CARE AT ALL TIMES.
CAUTION: DO NOT PLACE FINGERS, HANDS, KNIVES OR OTHER UTENSILS INTO
THE FOOD CHUTE. ALWAYS USE THE FOOD PUSHER TO GUIDE FOOD DOWN THE
FOOD CHUTE.
Care should be taken when removing the
food from the food processor by ensuring
the motor, processing blade and discs have
completely stopped before disassembling.
Ensure the Speed Selection Dial is turned to
the Off ‘O’ position, the appliance is switched
off at the power outlet and unplugged,
before removing the lid from the bowl. The
processing bowl should then be unlocked
from the motor body and the processing
blade or disc holder carefully removed before
attempting to remove the processed food.
Do not operate the food processor
continuously for periods longer than 3 minutes
on any setting or if processing a heavy load.
None of the recipes in this booklet should
require processing for longer than 3 minutes
and none are considered a heavy load. If the
food processor is operated continuously for
too long, it should be allowed to rest for 25-
30 minutes before recommencing.
•
•
Do not use food processor on a sink drain
board.
To protect against electric shock do not
immerse power cord, power plug or motor
base in water or any other liquid.
Do not move the food processor whilst in
operation.
Do not leave the food processor unattended
when in use.
Do not place any part of the food processor in
the dishwasher or microwave oven.
Do not process thin fluids such as water,
milk, stock, juice, etc. above the 200ml level
in the processing bowl as this could result
in overflow. To reduce the risk of overflow,
always add drier or thicker ingredients to the
processing bowl prior to adding fluids.
Keep the appliance clean. Follow the cleaning
instructions provided in this book.
•
•
•
•
•
•
•