Filter
Top Products
10
PAge heAder.....
ASSEMBLING YOUR BREVILLE PRODUCT
BEFORE FIRST USE
Before using your juicer for the first time,
remove and safely discard any packaging
material and promotional labels. Ensure the
power cord is unplugged. Wash the Filter
Bowl Surround, Nutri Disc™, Puree Disc,
Puree Insert, Juicer Cover, Food Pusher,
Juice Jug, Juice Jug Lid and Pulp Container
in warm soapy water with a soft cloth or
nylon brush. Rinse and dry thoroughly.
FOR USE WITH THE NUTRI DISC™
Place the motor base on a flat dry surface
such as a counter top. Ensure that the motor
base is turned OFF at the control panel then
unplug the cord.
1. Place the Filter Bowl Surround on the
top of the Motor Base.
2. Align the arrows on the Nutri Disc™ with
the arrows on the Motor Drive Coupling
and push down until it clicks into place.
Ensure the Nutri Disc™ is fitted securely
inside the Filter Bowl Surround and onto
the Motor Base.
3. Place the Juicer Cover over the Filter
Bowl Surround, positioning the Juicer
Cover over the stainless steel filter disc
and lower into position.
4. Raise the safety locking arm up and lock
into the two grooves on either side of
the juicer cover. The safety locking arm
should now be in a vertical position and
locked into place on top of the
juicer cover.