Filter
Top Products
21
CARE & CLEANING
CARE & CLEANING
CLEANING THE STEAM WAND
& FROTH ENHANCER
Always clean the Steam Wand and Froth
Enhancer after every use.
• After milk texturing, immediately turn
steam on to purge out any residual milk
from the Steam Wand.
• Remove the Froth Enhancer. Wipe the
Steam Wand with a damp cloth and
rinse the Froth Enhancer in warm tap
water. Ensure the steam holes on either
end of the Enhancer are clear. Use the
pin on the end of the provided Cleaning
Tool to unblock the hole(s).
• If the hole in the tip of the Steam Wand
becomes blocked, ensure the Selector
Control is in the center ‘Standby’
position, the Power On/Off button is
‘Off’ and the power cord is removed
from the power outlet. Allow the
machine to cool. Use the pin on the end
of the provided cleaning tool to unblock
the hole.
• If the Steam Wand remains blocked,
remove the tip using the integrated
spanner in the Cleaning Tool and soak
in hot water. Use the pin on the end of
the provided Cleaning Tool to unblock
the hole before reattaching to the
Steam Wand.