Filter
Top Products
13
• Release the speed button and ensure the whisk has
completely stopped turning before removing the
whisk from the food during operation.
• Place the mixing bowl on a damp cloth during
whisking. This will keep the mixing bowl stable.
• Always use fresh chilled cream and fresh eggs at
room temperature to achieve greater and more
stable volume when whisking.
• Always ensure the whisk and mixing bowl are
completely clean and free of fat before whisking
egg whites.
• It is recommended to use the ‘HIGH’ speed when
whisking egg whites and cream.
For cleaning purposes, the whisk shaft can be
removed from the gear box. This is done by
simply pulling the whisk shaft out of the gear
box. To re-assemble, push back in until it
“clicks” into place.
Note
Wizz Stainless Plus (Whisk) – assembly & operation
To attach the whisk
Remove blending shaft from motor body as on page 8.
Align the whisk shaft with the closed end of the gear
box and push until the whisk clicks into place. In a
clockwise direction, attach and lock the motor body
to the open end of the gear box (See fig 1).
Ensure whisk is dry with no water left inside before
re-attaching.
To use the whisk
For food preparation tips and recipes refer to page 16
and the recipes section.
Ensure the whisk is completely and properly
assembled as detailed above.
1. Place food to be processed into the plastic mixing
jug or a sufficiently large mixing jug.
2. Insert the plug into a 230/240V power outlet and
turn the power on.
4. Place the whisk into the food and depress the
desired speed to turn the whisk on.
5. Move the whisk through the ingredients with a
gentle raising and lowering action until desired
texture is achieved.
7. Switch off the motor by releasing the speed
button before lifting the whisk out of the bowl.
8. When processing has finished switch off the
motor by releasing the speed button, switch off
at the power outlet and remove the power plug.
To detach the whisk
Ensure the speed is released, power is turned off at
the power point and the appliance is unplugged.
Remove the whisk from the gear box by pulling out
the whisk shaft and unlocking the motor body from
the gear box in an anti-clockwise direction.
Recommendations when using the Wizz
Stainless Plus with the whisk
• Do not allow the whisk to hit the bottom or sides
of mixing bowl while the appliance is in operation,
as this may damage the whisk.
• To incorporate air into the ingredients when
whisking, use a sufficiently deep, wide container
and move the whisk through the ingredients with a
gentle raising and lowering action.
12