Filter
Top Products
Page 26
COPY SETTINGS (NO NAME COFFEE SETTINGS ONLY)
This function is used to transfer all the brew
settings from a NO NAME coffee flavor programmed
on one side of the brewer to the other side. A NO NAME
coffee is a flavor that is not in the grinder's memory or
is what appears if a Smart Funnel
®
is not used.
For example, once the left side's 3 batch sizes are
programmed (brew volumes, bypass percentages,
pulse brew times, pre-infusion times, and drip-out
times) for a particular NO NAME coffee, all the data can
be transferred from the left side of the brewer to the
right side in one step. The data can also be transferred
from right to left, if the right side had been the initial
set-up side. This results in less set-up time.
If two different NO NAME setups are required, one
on the left, the other on the right side, it is not
recommended that this function be used.
Procedure to copy settings:
1. Press and hold the ® pad until the display reads
SET RECIPES. Release the ® pad. Continue to
press and release the ® pad until the display reads
COPY SETTINGS.