Filter
Top Products
36
TRANSFORMER (240V TWO WIRE
MODELSONLY)(cont.)
1
2
3
FIG.34 TRANSFORMER TERMINALS
P1288
BLK & WHI to
Fan
RED & BLK to
Main Harness
SERVICE (cont.)
Removal and Replacement:
1. Disconnect the wires from the transformer.
2. Remove the two #8-32 keps nuts securing the
transformer to the dispenser base.
3. Remove and discard the transformer.
4. Install new transformer over the two weld studs on
the dispenser base and secure with two #8-32
keps nuts.
5. Refer to Fig. 34 when renonnecting the wires.
27591 031597