Filter
Top Products
14
PROGRAMMING (Continued)
BibEMPTY LOCKOUT
NO EXIT YES
BREW LOCKOUT ?
NO EXIT YES
ENERGY SAVER MODE
NO EXIT YES
E-SAVER IDLE TIME
(-) 4 HRS (+)
E-SAVER TANK TEMP
NO EXIT 140
Select (YES) to enable
Select (YES) to enable
Select (ON) to enable
Use the (+) or (-) buttons to
adjust the Idle Time
Select OFF or 140° F (60°C)
Select YES to Lockout dispensing until the BIB is
replaced and the pump has been Primed. Default
is NO.
Select YES to Lockout dispensing until the hot
water tank is at READY Temp. Default is NO.
Select ON to enable Energy Saver Mode. Default
is OFF.
Enter the amount of inactive time before the
dispenser goes into Energy Saver Mode. Default
is 4 hrs. Maximum is 24 hrs.
Choose OFF to turn the tank heaters off completely
or 140°F (60°C) to hold hot water at 140°F (60°C)
during E-Saver Mode. Default is 140°F (60°C).
LCD DISPLAY ACTION DESCRIPTION
41129 071409