Filter
Top Products
19
SITUATION EXPLANATION
The BUNN
®
(POD HOLDER
RELEASE BUTTON) indicator is
not on all of the time.
The HEATING INDICATOR
comes on when the COFFEE or
TEA button is pressed.
The HEATING INDICATOR
comes on during a brew cycle.
When the BUNN
®
button (Also known as the
POD HOLDER RELEASE BUTTON) is lit, this
indicates that the power to the machine is on.
No action is required. The BUNN
®
Pod
brewer is ready to brew.
When the brewer enters a sleep mode the POD
HOLDER BUTTON will not be glowing.
Pressing any button or the POD HOLDER
RELEASE BUTTON will wake up the brewer.
NOTE: If the brewer does not operate, refer to
the first situation listed in the beginning of this
troubleshooting section, on page 16.
The HEATING INDICATOR will glow when the
tank is bringing water up to brew temperature.
Wait for the HEATING INDICATOR to go out.
When the Indicator has gone out, a brew
cycle can be started.
The water entering the internal tank is being
heated for the next brew cycle.
No action is required. As the heated water is
being emptied to brew a serving, new water
enters the internal tank. The brewer senses
this new water and activates the tank heater
to heat the water for the next brew cycle.
The indicator coming on during a brew cycle
is normal.