Filter
Top Products
SmartSwitch 1800 Voice Configuration
12-6 Speed Dial Configuration
Figure 12-2. Voice Speed Dial ConÞguration Window
The top part of the window displays a list of conÞgured speed-dial numbers with
associated long-dial and extended-dial strings. The bottom part of the window
allows you to modify or add the following parameters:
Speed Dial Digits
This is the number of characters (1-4) conÞgured for Dial Digits in the Voice
Parameters window (see ConÞguring System-Level Voice Parameters,
page 12-2). A question-mark wildcard can be used for any single digit, and an
asterisk wildcard can be used for any number of digits.
Long Dial Map
This is a six-digit number for which the speed-dial number is a shortcut. The
number must identify its associated device as follows.
SmartSwitch 1800:
Digits 1-4 = Voice Node Number, 0001-9999, conÞgured in the Voice Parameters
window (see ConÞguring System-Level Voice Parameters, page 12-2).
Digit 5 = 0 or 1. This digit is irrelevant on the SmartSwitch 1800, so either value
can be used.
Digit 6= Channel number 4 or 5, which identiÞes the Voice Port. (Refer to
Chapter 2, Using the FRX4000, FRX6000, and SmartSwitch 1800 Hub View for
information on Voice Port numbers.)