Filter
Top Products
Speed Dial Configuration 12-7
SmartSwitch 1800 Voice Configuration
Valid values for the voice concentrator vary depending on the device type; the
numbers below relate to ACT NetworksÕ SDM network access devices.
SDM:
Digits 1-2= Switch number 01-61.
Digits 3-4= Port number 00-15.
Digit 5= Slot number 1-8 if FP or DX. Slot number 1-4 if JFP.
Digit 6= Channel number 0-5 if DVC. Arbitrary (typically 1-6) if FP or JFP.
Extended Dial String
This is an extended set of digits that will be forwarded with the call if Ext. Digits
Source is set to Map in the Voice ConÞguration window (see ConÞguring Voice
Ports, page 12-8). If Ext. Digits Source is set to User, any extended digits must be
entered by the operator at the initiating device.
Calls placed to a speed-dial number will go to the device (e.g., PBX) whose full
number is associated with that speed-dial number in the Voice Speed Dial
ConÞguration window. If extended dial digits are included in the table or the call,
the call will automatically be forwarded through the remote device to the
telephone number that matches the extended digits.
Adding or Modifying Speed Dial Numbers
First, access the Voice Speed Dial ConÞguration Window (see Speed Dial
ConÞguration, page 12-5).
To add a new Speed Dial Number:
1. Enter the configurable values for each number.
2. Click on to add your new entry.
To modify an existing entry:
1. In the list box, click to select the number you wish to modify. The selected
entry will be highlighted. (Note that you can only modify one entry at a time.)
2. Edit the fields, as desired. If you make some changes, and would like to return
to the original values, click on the Refresh button.
3. Click on to modify the selected entry.
To delete an existing entry:
1. In the list box, click to select the number you wish to delete. The selected
entry will be highlighted. (Note that you can only delete one entry at a time.)
2. Click on to delete the selected entry.