Filter
Top Products
F O R C E D A I R O V E N M A N U A L
Cascade TEK 5245-A NE Elam Young Parkway Hilllsboro Oregon 97124
Toll Free 888-835-9250 503-648-1818 FAX 503-648-1798 info@cascadetek.com www.cascadetek.com
REV 01.08
6
3.5 Cleaning: The oven interior was cleaned at the factory, but not sterilized.
Remove all interior parts if assembled and clean with a disinfectant that is
appropriate to your application. DO NOT USE chlorine-based bleaches or
abrasives as this will damage the stainless steel interior. DO NOT USE spray
cleaners that might leak through openings and cracks and get on electrical parts or
that may contain solvents that will harm the coatings. A similar periodic cleaning is
recommended.
WARNING: Never clean the unit with alcohol or flammable cleaners with the unit
connected to the electrical supply. Always disconnect the unit form the electrical
service when cleaning and assure all volatile or flammable cleaners are evaporated
and dry before reattaching the unit to the power supply.
3.6 Burn In: It is recommended that the unit go through a “burning in” process prior
to operation. This is to eliminate the smoking of protective coatings on the
element. Read sections 4, 5 and 6 carefully to understand operating
requirements. To burn in, turn the Over-Temperature Safety to maximum and set
the digital display to 200°C. Run a minimum of one (1) hour until smoke
dissipates.