Filter
Top Products
13
Setting Time of Day (fig. 7)
The programmer is provided with an electronic clock with luminous figures showing the hour and
minutes.
The first time the oven is connected up to the electricity supply and after a power cut, three zeroes will
flash on the programmer display.
To adjust the time, the two buttons
must be pressed simultaneously and then the button or
until the correct time is set.
Setting speed automatically increases if you keep the setting buttons pressed.
Manual Operation
To use the oven manually, i.e. without the programmer, you must cancel the flashing A by pressing the
two buttons simultaneously (the letter A will go out and the symbol will come on).
Cancelling a Programme
If the letter A is not flashing (which means that a cooking program has already been set) by pressing the
two buttons simultaneously you will cancel the program and switch to manual.
If the oven is on, you must switch it off manually.
Fig. 7 Fig. 8