CDA DC730 Double Oven User Manual


 
16
A
A
Fig. 13
Fig. 14
Automatic Cooking
To cook in the oven in automatic mode follow the instructions below:
1. Set the cooking time
2. Set the end of cooking time
3. Set the cooking temperature and function
These operations are carried out as follows:
1. Set the cooking time by pressing button
and then to move forward or to move back if you
have gone beyond the required time (fig. 13).
The letter A and the symbol appear.
2. Press button ; the cooking time already added to the clock time appear.
Set the end of cooking time by pressing button if you go beyond the required time, you can go back
by pressing button .
The symbol go out and the letter A remains on (fig. 14).
If during the setting the letter A begins to flash on the display and the acoustic signal comes on, this
indicates a programming error, i.e. the cooking cycle has been superimposed on the clock time. In this
case alter the end of cooking time or the cooking time as above.
3. Set the cooking temperature and function via the function selector and thermostat knob (see specific
chapters). The oven is now programmed and everything will work automatically; the oven will come
on as required and finish cooking at the programmed time.
At the start of the cooking the symbol appears.
During cooking the letter A and the symbol remains on; press
button to display the remaining time until end of cooking or
press button to display the end of cooking time.
The cooking program can be cancelled at any time by pressing
the two buttons simultaneously.
At the end of cooking, the oven switches off, the symbol goes
out, the letter A flashes and the acoustic signal comes on - this
can be switched off by pressing any of the buttons.
Reset the function selector and thermostat knob and set the
programmer to manual by pressing the two buttons
simultaneously.
Important: Also if oven is turned off automatically by the
programmer, remember to turn to the off position the function
selector and the thermostat knob. If not, when pressing two
buttons simultaneously for manual use, the oven will start
to operate.
Remember to press the two buttons simultaneously to be
able to use the oven in manual setting.