CDA DC730 Double Oven User Manual


 
30
Fixing the Double Oven
The double oven should then be secured by 6 screws (not supplied) fitted into the holes provided at the
sides of the oven (Fig. 40). If you open the oven doors, you will see some screw holes.
Remember the housing should not be free standing but be secured to the wall and/or adjacent fittings.
Note: It is essential that when installing your double oven, adequate air circulation is available within the
installation. Inadequate air circulation may greatly impair the performance of your double oven and may
affect adjacent cabinets due to an increase in temperature.
Adjust the hinges of furniture door
adjacent to the double oven to allow
a 5 - 7 mm gap between the furniture
door and the oven frame.
IMPORTANT:
If installing a base panel leave a
space as indicated in fig. 41 to
allow air circulation.
200
10
Fig. 41
10 mm
2 mm
Fig. 42
Fig. 40
KEEP ATTENTION !
STAND AWAY FROM LOUVERS POSITIONED
BELOW THE CONTROL PANEL.
HOT AIR WHICH ESCAPES CAN CAUSE BURNS
TO HANDS, FACE, END/OR EYES.
KEEP CHILDREN AWAY.