Filter
Top Products
15
Semi - Automatic Cooking
This automatically switches the oven off after the required cooking time. There are two methods of semi-
automatic cooking:
1. METHOD: Programming the cooking time (Fig. 11)
– Set the cooking time by pressing button
and then button to move forward or to move back
if you have gone beyond the required time.
The letter A and the symbol will appear.
2. METHOD: Programming the end of cooking time (Fig. 12)
– Set the cooking time by pressing button and then button to move forward or to move back
if you have gone beyond the required time.
The letter A and the symbol will appear.
Having programmed according to one of the above methods, set the temperature and function via the
function selector and thermostat knob (see specific chapters).
The oven will come on immediately and when the set time or programmed end of cooking time expires,
it will automatically switch off.
During cooking the letter A and the symbol remains on; press button to display the remaining
time until end of cooking or press button to display the end of cooking time.
The cooking program can be cancelled at any time by pressing the two buttons simultaneously.
At the end of cooking, turn the oven knob to the off position the symbol will go out.
The letter A will flash and the acoustic signal will come on - this can be switched off by pressing any of
the buttons.
Reset the function selector and thermostat knob and set the programmer to manual by pressing the two
buttons simultaneously.
Important: Also if oven is turned off automatically by the programmer, remember to turn to the
off position the function selector and the thermostat knob. If not, when pressing two buttons
simultaneously for manual use, the oven will start to operate.
Remember to press the two buttons simultaneously to be able to use the oven in manual setting.
A
A
Fig. 11
Fig. 12