CDA DC730 Double Oven User Manual


 
25
To Build in the Double Oven
The appliance should be installed by a QUALIFIED INSTALLATION TECHNICIAN.
The appliance must be installed in compliance with regulations in force.
The built under double oven shall be fitted under the working surface into a kitchen base unit (width and
depth 60 cm) but you must ensure that it is properly ventilated.
Installation requires a compartment as illustrated and described in next chapters:
Installation "A" between Existing Side Cabinets (560 or 600 mm GAP) (figs. 32, 33, 34, 36)
Installation "B" between Side Cabinets by Removing Provious Housing (figs. 35, 36)
Installation "C" by Using Housing Unit (figs. 37, 38, 39)
CAUTION: Do not lift the double oven by the door handles.
WARNING !
– We would point out that the adhesive which bonds the plastic laminate to the furniture must withstand
temperatures not less than 150° C to avoid delamination.
– The appliance must be housed in heat resistant units.
– The walls of the units must be capable of resisting temperatures of 75° C above room temperature.