Filter
Top Products
LIGHTING OF GAS GRILL BURNER
The thermostatic tap controlling the gas supply to the burner is equipped with a safety
device which automatically stops the gas flow in case of flame extinction.
The electric ignition starts up by pressing the thermostat knob.
A safety device prevents the electric ignition from functioning when the
oven door is shut.
To turn on the grill burner:
1) Open the oven door.
2) Press thoroughly and turn clockwise the oven gas thermostat knob (fig. 20) to set
symbol
.
To light the grill manually, put a flame to the right and left side of the burner for 2-3
seconds after the thermostat has been opened (fig. 21).
3) Wait about ten seconds after the burner lighting before releasing the knob (time of
priming of the valve).
Should the flame of the burner extinguish for any reason, the safety valve will cut off
automatically the gas flow to the thermostat.
IMPORTANT: In case of accidental extinction of the burner, turn off the con-
trol knob and wait at least one minute before trying to ignite again.
For correct use see chapter “TRADITIONAL GRILLING”.
Remember to keep children away from the appliance when you use the grill
or oven, since these parts become very hot.
Figure 20 Figure 21
18